主要技术参数
剪切长宽度:2米以上 剪切厚度:(普钢)0.2-4mm
剪切直径:(普钢)2-12mm 最大剪切角钢:30*30*3mm
机体外形尺寸:400*380*120mm 加力杆长度:540-780mm 机体重量:14公斤
用于普通铜板、铝板、角钢、棒材、纸板、皮革、塑料和橡胶板材等
功能描述
多功能手动剪切机,是国内首创的专利产品。主要适用于<45kg/mm2的各种金属或非金属材料的剪切),特别适用于大块金属板材的剪切。长度、宽度不限,该机还没有导向部分,从而保证了剪切的垂直度,对0.2-4mm厚度的普通钢板剪切自如,非常省力。还可以剪切角钢的45度角和剪切曲线形状的板材及直径12mm以下的圆钢等,该机体采用高强度金属整体铸造,有足够的抗受力变形刚度。刀片采用优质合金钢材制造,经过严格的热处理工艺,具有强度高、韧性好、保锋力强等优点,实为金属冷作、钣金、机修工的好帮手。
使用说明
剪切前最好将机体用M10螺丝固定在一个高出地面约0.5米高的物体上或用膨胀螺丝固定在水泥地面上,在剪切2mm以内板材时加力杆不需要伸长即可剪切,如剪切3-4mm板材可将加力杆抽出固定好即可,但不得任意加长加力杆,防止损坏机体。剪切时需将压板螺丝调到与被剪切板材水平处。
单位:南京银剑太阳能工程有限公司
地址:江宁大学城科技园宁志太阳能集团
联系人:徐正
QQ:758528225 猛龙剪切机
电话:13705150588
Multifunctional Hand-Operated Shearer
Main technical parameters
Shearable length and width : more than 2 meters
Shearable thickness: 0.2~4mm (common steel)
Shearable diameter: 2~ 12mm (common steel)
size of anger steel:30*30*3mm
size of the shearer appearance :400*380*120mm
length of the extended bar :540-780mm
commercial copper plate, aluminum plate, anger steel, bar steel, paper plate, leather, plasties & robber plate
weigh of the shearer:14 kilogram
Usage
It would be best that the shearer is fixed on a object 0.5 meter above ground level with M10 screws or directly fixed on the concrete ground surface with expansion screws. When to shear <2mm thickness plates it is good only to use lever arm, while to shear 3-4mm thickness plate, it is necessary to use the extended bar. However, the bar can not be re-extended wantonly in order to avoid any damage of the shearer.
DIRECTIONS
Multifunctional Hand-Operated Shearer, a Patent product first created domestically, applies to shearing metallic or non-metallic materials whose tensile strength <45kg/mm. Specially, it is also used to shear a large size of metallic plate, the sizes of the plate in length and width are not limited. Having a directive part, the shearer ensures the perpendicular degree of the cut section of the plate, It can shear not only common steel plates with 0.2-4mm thickness smoothly, but also 45 anger of anger steels, curve shape plate and <12mm bar round section easily, The body of the shearer is cast in a whole and has enough stiffness to resist deformation. The shearer cutter, made of a alloy in high quality and heat-treated with strict technique, possess the properties such as high tensile strength, good toughness and keeping sharp edge. Therefore, it is a good assistant for metal cold deformation, cold working and machine repair.
China Nanjing yinjian industry company Ltd
Tel: 0086-025-52100959
Mobil: 13705150588
QQ: 758528225 |